google-site-verification: googlefde2938ea54d7d44.html
top of page
BACK TO TOP
INITIAL PINCH PLATE ROLLS
Precision Engineered Hydraulic & Mechanical Dependability
Backed by the Best Guarantee in the Industry!

Carell Corporation provides superior quality "slip rolls", "initial pinch rolls" and three roll plate rolls. Where the bending sequence is performed by "pinching" the flat sheet between two counter-opposed rolls while the third offset roll or "bending roll" moves upward to contact and bend the sheet. Extraction methods are equipped with either forward tilting, a releasing top roll or a removable end yoke. They are generally designed for lighter capacity applications that makes a cost effective solution to your production!

Click Image, Links or Scroll Down for descriptions, standard equipment, options & technical specifications

RM & HRM SERIES

12 Ga to 16 Ga • 3' to 6' Long

RM 1270X90-001b
HRM 1270x90
IRM-1270x120-003b.

IRM SERIES

14 Ga to 3/16" • 3' to 8' Long

HRM
OMCCA-HTSI-006c

Shown with Optional

LED Readout 

OMCCA-TSI-001b
OMCCA-HTSI-CNC-009c.

TSI SERIES

20 Ga to 1/4" • 3' to 6' Long

HTSI SERIES

20 Ga to 3/8" • 3' to 10' Long

We manufacture and stock; tools for bending, tube rolls, pipe rolls, special tooling and custom tooling. We also carry the following brand names

Parmigiani, Comac, Memoli, Omcca, Simasv, Isitan, Icaro, Offmer & More!

CARELL-ImprintBack-001.jpg
RM & HRM SERIES

3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS

HRM-control-001b
RM 1270X90-001b
HRM 1270x90-002b

RM Series

STANDARD FEATURES

  • RM Models have manual adjustment of the lateral bending roll via single hand wheel and precision worm drive jack screw boxes.

  • Lateral bending roll can be mechanically tilted for cone rolling.

  • LED Readout to monitor the position of the lateral bending roller

  • Hardened & polished rolls

  • Cone device and rod grooves are standard and identical to HRM Series models.

HRM Series

STANDARD FEATURES

  • Lateral Roll is HYDRAULIC actuated from the control console with joystick controlled tilting action for rolling cones. Roll is idle in rotation and has 3 round rod grooves

  • LED Readout to monitor the position of the lateral bending roller

  • Induction Hardened and Polished Surfaces on all 3 rolls

  • Cone Rolling Device for rolling conical shapes

  • Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears

  • Pinch Roll Pressure adjustment via ergonomic easy adjust cam lever

  • Lateral Quick Release Top Roll with safety lock

  • 24V Low voltage controls, Foot Pedal Rotation, E-Stop, Safety Trip Wires, Instruction Manual

RM & HRM SERIES SPECIFICATIONS

RM-HRM-chart-2023.
RM & HRM SERIES
IRM SERIES
3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS

CARELL IRM SERIES units are 3 roll, single initial pinch plate bending machines with powered rotation of both top upper and lower pinch roll.

Choice of 10 models from 3' to 8' long in 14 Gage to 3/16" capacities.

Suitable for medium to low production runs, Affordable & Efficient!.

IRM-DETAIL-001.
IRM-2050x130-001
IRM-1270x120-003b

IRM SERIES STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears

  • Base in steel, electro-welded and cast steel shoulder frames, all stress relieved

  • Lateral roll, idle in rotation with manual up/down adjustment via single hand-wheel

  • Central pinch roll adjustable manually via single hand-wheel

  • Front quick release top roll with rotation lock out safety switc

  • Lateral roll movement via electric motor and heavy duty worm gear drive for precise positioning and maximum power

  • Cone rolling device is standard equipment

  • Lateral bending roll and pinch roll incline for cone working

  • Low voltage push button controls and foot pedals for rotation control w/ E-Stop

  • Multi point safety system including circumferential trip wire

  • Manual forced lubrication

  • Instruction manual

  • Wire / rod grooves on pinch roll and lateral bending roll

 

IRM SERIES OPTIONS

  • Induction hardened and polished rolls

  • LED Digital Readout

  • Powered Lateral Bending Roll Adjustment up/down

IRM SERIES SPECIFICATIONS

IRM SERIES-chart-2024
IRM SERIES
CARELL-ImprintBack-001.jpg
TSI SERIES
POWERED INITIAL PINCH PLATE ROLLS 
OMCCA-TSI-022b

STANDARD FEATURES

  • Frames heavy solid steel alloy sheet, CNC machined and stress relieved 

  • Lateral roll, idle and moving on roller bearings 

  • Pinch roll positioning via heavy duty screw jacks with single manual hand wheel   

  • Manual drop end top roll yoke (w/ lock out safety switch and set lock)

  • Lateral roll movement via precision heavy duty worm gear and manual wheel crank or optionally powered up/down by efficient drive train system 

  • Lateral bending roll is adjustable in incline for cone rolling

  • Bending & pinch roll equipped with analog digital counters for repeat reference position 

  • Low voltage foot pedal stand for CW/CCW rotation with E-stop palm button 

  • Multi point safety system including circumferential trip wire

  • Illustrated Instruction manual w/ electrical schematics 

The Carell TSI Series   
is a 3 roll, single initial pinch plate bending machine with precision adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls using hig
h efficiency motor/reduction unit. They are designed to work with 16 GA x 48” wide material in capacity.

FIVE YEAR

Limited Frame

Warranty!

OMCCA-HTSI-CNC-009c

Shown with Optional LED Readout 

NOTE: With Optional LED Readout and/or Optional Powered Bending Roll, machine controls are push buttons on a mobile console in lieu of foot pedals.

TSI SERIES SPECIFICATIONS

OMCCA TSI SERIES-chart-2023b
TSI SERIES
HTSI SERIES
SplashBack-2022b.jpg
HTSI SERIES
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS 

The CARELL HTSI SERIES unit is a 3 roll, single initial pinch plate bending machine with powered adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls.

OMCCA-HTSI-006c
OMCCA-HTSI-009b
OMCCA-HTSI-Control-001b

STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed
    reducer through NiCrMo solid stock gears

  • Base in steel, electro-welded and stress relieved

  • Lateral roll, idle and moving on roller bearings

  • Central pinch roll pinch pressure adjustable by precision worm gear movement

  • Front quick release top roll with rotation lock out safety switch

  • Lateral roll movement via electric motor and heavy duty worm gear drive for precise
    positioning and maximum power

  • Lateral bending roll and pinch roll incline for cone working

  • Low voltage push button controls via mobile control console

  • Multi point safety system including circumferential trip wire

  • Forced central lubrication system with pump and tank

  • Instruction manual

HTSI SERIES SPECIFICATIONS

OMCCA HTSI SERIES-chart-2023b
SplashBack-2022b.jpg
CARELL-ImprintBack-001.jpg
MRM-H SERIES  
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS 
MRM Series 3 Roll Plate Rolls

Carell MRM-H Series are Fully Hydraulic 3 Roll Initial Pinch Plate Rolls with HYDRAULIC
bending roll, pinch roll & drop ends

    
MRM-H SERIES STANDARD FEATURES

  • Lateral Roll is HYDRAULIC actuated from the control console with joystick 

  • controlled tilting action for rolling cones. Roll is idle in rotation (Round Rod Grooves Optional)

  • 2 LED Readouts to monitor position of bending & pinch rolls

  • Induction Hardened & Polished Surfaces on all 3 rolls

  • Cone Rolling Device for rolling conical shapes

  • Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through 

  • NiCrMo solid stock gears

  • Pinch Roll Pressure adjustment via push buttons

  • Hydraulic Drop End for quick and easy removal of the work piece

  • 24V Low voltage Push Button Controls, E-Stop, Safety Trip Wires, Instruction Manual

         OPTIONS: Rod Grooves, Lateral & Overhead Material Supports, Variable Speed, 2 Speed 

         Rotation, Custom Lengths and Dedicated Configurations

MRM-H SERIES SPECIFICATIONS

MRM-H SERIES-chart-2023
MRM SERIES
MRM-S SERIES  
Powered 3 ROLL INITIAL PINCH PLATE ROLLS 
New MRM - S Series general transparent-4.png
MRM-S Standard Features

  • This mechanical model is designed for light to medium jobs. It is used in jobs up to 10 mm thickness materials. It is used in Aluminium Bendings, Air Conditioning Channels, Advertising

  • Panels and Sheet Metal Covers.

  • All models are planet reducer driven

  • SAE 1050 (CK 45) Quality Certificated Steel Rolls with high tensile strength

  • Steel Welded Main Frames

  • Mechanical manual openable dropend

  • Mobile Control Panel

  • Conical Bending Device

  • Central lubrication system

  • Top roll support system and with planetary reducer

  • Precision Bending with Brake Motor

  • Motorised Adjustment of Back Roll

  • Built according to EC Safety Directives (CE certificate)

  • User’s manual

MRM-S Chart  GOOD (1).jpg

CALL ONE OF OUR SALES & APPLICATION ENGINEERS FOR DETAILED 

INFORMATION AND PRICING

bottom of page