google-site-verification: googlefde2938ea54d7d44.html
top of page
INITIAL PINCH PLATE ROLLS
Precision Engineered Hydraulic & Mechanical Dependability
Backed by the Best Guarantee in the Industry!

Carell Corporation provides superior quality "slip rolls", "initial pinch rolls" and three roll plate rolls. Where the bending sequence is performed by "pinching" the flat sheet between two counter-opposed rolls while the third offset roll or "bending roll" moves upward to contact and bend the sheet. Extraction methods are equipped with either forward tilting, a releasing top roll or a removable end yoke. They are generally designed for lighter capacity applications that makes a cost effective solution to your production!

Click Image, Links or Scroll Down for descriptions, standard equipment, options & technical specifications

RM 1270X90-001b.png
HRM 1270x90.png

RM & HRM SERIES

12 Ga to 16 Ga • 3' to 6' Long

IRM-1270x120-003b.png

IRM SERIES

14 Ga to 3/16" • 3' to 8' Long

LS Series 3 Roll Plate Rolls

LS SERIES

26 Ga to 1/8" • 3' to 6' Long

OMCCA-HTSI-CNC-009c.png
OMCCA-TSI-022b.png

Shown with 

Optional

LED Readout 

TSI SERIES

16 Ga to 14 Ga • 4' to 6' Long

HTSI SERIES

20 Ga to 3/8" • 3' to 10' Long

A31 SERIES

20 Ga to 3/8" • 3' to 10' Long

OMCCA-HTSI-009b.png

We manufacture and stock; tools for bending, tube rolls, pipe rolls, special tooling and custom tooling. We also carry the following brand names

Parmigiani, Comac, Famar, Simasv, Memoli, Isitan, Icaro, Omcca & Others

BACK TO TOP
CARELL-ImprintBack-001.jpg
RM & HRM SERIES

3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS

HRM-control-001b.png
RM 1270X90-001b.png
HRM 1270x90-002b.png

RM Series

STANDARD FEATURES

  • RM Models have manual adjustment of the lateral bending roll via single hand wheel and precision worm drive jack screw boxes.

  • Lateral bending roll can be mechanically tilted for cone rolling.

  • LED Readout to monitor the position of the lateral bending roller

  • Hardened & polished rolls

  • Cone device and rod grooves are standard and identical to HRM Series models.

HRM Series

STANDARD FEATURES

  • Lateral Roll is HYDRAULIC actuated from the control console with joystick controlled tilting action for rolling cones. Roll is idle in rotation and has 3 round rod grooves

  • LED Readout to monitor the position of the lateral bending roller

  • Induction Hardened and Polished Surfaces on all 3 rolls

  • Cone Rolling Device for rolling conical shapes

  • Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears

  • Pinch Roll Pressure adjustment via ergonomic easy adjust cam lever

  • Lateral Quick Release Top Roll with safety lock

  • 24V Low voltage controls, Foot Pedal Rotation, E-Stop, Safety Trip Wires, Instruction Manual

RM & HRM SERIES SPECIFICATIONS

RM-HRM-chart-2023.png
RM & HRM SERIES
IRM SERIES
3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS

CARELL IRM SERIES units are 3 roll, single initial pinch plate bending machines with powered rotation of both top upper and lower pinch roll.

Choice of 10 models from 3' to 8' long in 14 Gage to 3/16" capacities.

Suitable for medium to low production runs, Affordable & Efficient!.

IRM-DETAIL-001.jpg
IRM-2050x130-001.png
IRM-1270x120-003b.png

IRM SERIES STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears

  • Base in steel, electro-welded and cast steel shoulder frames, all stress relieved

  • Lateral roll, idle in rotation with manual up/down adjustment via single hand-wheel

  • Central pinch roll adjustable manually via single hand-wheel

  • Front quick release top roll with rotation lock out safety switc

  • Lateral roll movement via electric motor and heavy duty worm gear drive for precise positioning and maximum power

  • Cone rolling device is standard equipment

  • Lateral bending roll and pinch roll incline for cone working

  • Low voltage push button controls and foot pedals for rotation control w/ E-Stop

  • Multi point safety system including circumferential trip wire

  • Manual forced lubrication

  • Instruction manual

  • Wire / rod grooves on pinch roll and lateral bending roll

 

IRM SERIES OPTIONS

  • Induction hardened and polished rolls

  • LED Digital Readout

  • Powered Lateral Bending Roll Adjustment up/down

IRM SERIES SPECIFICATIONS

IRM SERIES-chart-2023.png
IRM SERIES
LS SERIES
CARELL-ImprintBack-001.jpg
LS SERIES
3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS

The Carell

LS Series   
is a 3 roll, single initial pinch plate bending machine with precision adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls using high efficiency motor/reduction unit.

LS Series 3 Roll Plate Rolls
A35-101.2-026b.png

STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed reducer 
    through NiCrMo solid stock gears

  • Base in electro-welded and/or reinforced spheroidal cast steel, stress relieved 

  • Lateral roll, idle and moving on roller bearings

  • Central pinch roll pinch pressure adjustable by ergonomic easy adjust cam  

  • Front quick release top roll with rotation lock out safety switch and set lock

  • Lateral roll movement via precision heavy duty worm gear and manual wheel crank or optionally
    powered up/down by efficient drive train system

  • Lateral bending roll and pinch roll incline for cone working 

  • Low voltage foot pedal stand for CW/CCW rotation w/ E-stop palm button 

  • Multi point safety system including circumferential trip wire

  • Instruction manual 

LS Series-Cone device-001b.png

Optional Equipment

  • Cone rolling attachment

  • Induction hardened rolls

  • Shaft extensions for section Dies

  • Section Bending Dies

  • Alignment  Groove & Rod Grooves

  • Digital LED Readout

Shown with Cone

Rolling Attachment

LS SERIES SPECIFICATIONS

LS SERIES-chart-2023.png
TSI SERIES
POWERED INITIAL PINCH PLATE ROLLS 
OMCCA-TSI-022b.png

STANDARD FEATURES

  • Frames heavy solid steel alloy sheet, CNC machined and stress relieved 

  • Lateral roll, idle and moving on roller bearings 

  • Pinch roll positioning via heavy duty screw jacks with single manual hand wheel   

  • Manual drop end top roll yoke (w/ lock out safety switch and set lock)

  • Lateral roll movement via precision heavy duty worm gear and manual wheel crank or optionally powered up/down by efficient drive train system 

  • Lateral bending roll is adjustable in incline for cone rolling

  • Bending & pinch roll equipped with analog digital counters for repeat reference position 

  • Low voltage foot pedal stand for CW/CCW rotation with E-stop palm button 

  • Multi point safety system including circumferential trip wire

  • Illustrated Instruction manual w/ electrical schematics 

The Carell TSI Series   
is a 3 roll, single initial pinch plate bending machine with precision adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls using hig
h efficiency motor/reduction unit. They are designed to work with 16 GA x 48” wide material in capacity.

FIVE YEAR

Limited Frame

Warranty!

OMCCA-HTSI-CNC-009c.png

Shown with Optional LED Readout 

NOTE: With Optional LED Readout and/or Optional Powered Bending Roll, machine controls are push buttons on a mobile console in lieu of foot pedals.

TSI SERIES SPECIFICATIONS

TSI-Chart-2023.png
TSI SERIES
HTSI SERIES
CARELL-ImprintBack-001.jpg
HTSI SERIES
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS 

The CARELL HTSI SERIES unit is a 3 roll, single initial pinch plate bending machine with powered adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls.

OMCCA-HTSI-006c.png
OMCCA-HTSI-009b.png
OMCCA-HTSI-Control-001b.png

STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed
    reducer through NiCrMo solid stock gears

  • Base in steel, electro-welded and stress relieved

  • Lateral roll, idle and moving on roller bearings

  • Central pinch roll pinch pressure adjustable by precision worm gear movement

  • Front quick release top roll with rotation lock out safety switch

  • Lateral roll movement via electric motor and heavy duty worm gear drive for precise
    positioning and maximum power

  • Lateral bending roll and pinch roll incline for cone working

  • Low voltage push button controls via mobile control console

  • Multi point safety system including circumferential trip wire

  • Forced central lubrication system with pump and tank

  • Instruction manual

HTSI SERIES SPECIFICATIONS

HTSI-Chart-2023.png
A31 SERIES
POWERED INITIAL PINCH PLATE ROLLS 
A31Series 3 Roll Plate Rolls

Shown above in Horizontal Position and in a Vertical Plate Roll Configuration

The CARELL A31 SERIES unit is a 3 roll, single initial pinch plate bending machine with powered adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls.

 

STANDARD FEATURES

  • Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed
    reducer through NiCrMo solid stock gears

  • Base in steel, electro-welded and stress relieved

  • Lateral roll, idle and moving on roller bearings

  • Central pinch roll pinch pressure adjustable by precision worm gear movement

  • Front quick release top roll with rotation lock out safety switch

  • Lateral roll movement via electric motor and heavy duty worm gear drive for precise
    positioning and maximum power

  • Lateral bending roll and pinch roll incline for cone working

  • Low voltage push button controls via mobile control console

  • Multi point safety system including circumferential trip wire

  • Forced central lubrication system with pump and tank

  • Instruction manual

OPTIONS

  • Cone rolling attachment

  • Induction hardened rolls

  • Shaft extensions for section bending rolls

  • Section bending Dies

  • Powered Pinch Adjustment

  • Powered traction rotation of back 3rd roll

  • Trailing lead foot switch for CW/CCW rotation (adds to existing control pedestal with push-buttons)

A31 SERIES SPECIFICATIONS

A31 SERIES-chart-2023.png
A31 SERIES
CARELL-ImprintBack-001.jpg
MRM-H SERIES  
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS 
MRM Series 3 Roll Plate Rolls

Carell MRM-H Series are Fully Hydraulic 3 Roll Initial Pinch Plate Rolls with HYDRAULIC
bending roll, pinch roll & drop ends

    
MRM-H SERIES STANDARD FEATURES

  • Lateral Roll is HYDRAULIC actuated from the control console with joystick 

  • controlled tilting action for rolling cones. Roll is idle in rotation (Round Rod Grooves Optional)

  • 2 LED Readouts to monitor position of bending & pinch rolls

  • Induction Hardened & Polished Surfaces on all 3 rolls

  • Cone Rolling Device for rolling conical shapes

  • Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through 

  • NiCrMo solid stock gears

  • Pinch Roll Pressure adjustment via push buttons

  • Hydraulic Drop End for quick and easy removal of the work piece

  • 24V Low voltage Push Button Controls, E-Stop, Safety Trip Wires, Instruction Manual

         OPTIONS: Rod Grooves, Lateral & Overhead Material Supports, Variable Speed, 2 Speed 

         Rotation, Custom Lengths and Dedicated Configurations

MRM-H SERIES SPECIFICATIONS

MRM-H SERIES-chart-2023.png

CALL ONE OF OUR SALES & APPLICATION ENGINEERS FOR DETAILED 

INFORMATION AND PRICING

MRM SERIES
bottom of page