CARELL CORPORATION IN-STOCK SPECIALS! CLICK QUICK REFERENCE BUTTON TO JUMP TO YOUR CATAGORY Click on machine model for details.Hablamos Español. Puede llamarnos directamente o enviarnos un email a: [email protected] SPECIAL ACQUISITION HORIZONTAL PRESSES VBH 10/630 CNC 10’ x 3” Parmigiani 4-Roll Plate Roll, Full CNC 3D Graphic Controls, Hardened Rolls, Cone Device, Pre-Disposed for 3 material supports, 480V In-Stock/Italy CALL OR EMAIL Request-A-Quote VBH 10/460 CNC 10’ x 1-½” Parmigiani 4-Roll Plate Roll, Full CNC 3D Graphic Controls, Hardened Rolls, Cone Device, Pre-Disposed for 3 material supports, 480V SOLD! Request-A-Quote VBH 10/390 CNC 10’ x 1” Parmigiani 4-Roll Plate Roll, Full CNC 3D Graphic Controls, Hardened Rolls, Cone Device, Pre-Disposed for 3 material supports, 480V In-Stock/Italy CALL OR EMAIL Request-A-Quote VBH 10/370 CNC 10’ x 1” Parmigiani 4-Roll Plate Roll, Full CNC Graphic Controls, Hardened Rolls, Cone Device, 480V CALL OR EMAIL Request-A-Quote VBH 8/290 ​ 8’ x 5/8” 4-Roll CNC Plate Roll, Hardened & Polished Rolls, Cone Device, 3D Graphic CNC "Stradivari" controls, fully pre-disposed for Overhead and side supports 480V, SN: 0427/20N ​ CALL OR EMAIL Request-A-Quote VBH 6/280 CNC 6’ x 5/8” Parmigiani 4-Roll Plate Roll, Full CNC 3D Graphic Controls, Hardened Rolls, Cone Device, Pre-Disposed for 3 material supports, 480V In-Stock/Italy CALL OR EMAIL Request-A-Quote 4RH NC 20/5 10' x ⅞" 4-Roll Plate Bending Machine w/ Siemens CNC Touch Screen, Hardened Rolls, Cone Device. 480V In Stock! List: $208,000 SPECIAL:$18 6,500 Request-A-Quote HRM 1270x90 4' x 12 Ga Initial Pinch Roll with Hydraulic Bending Roll movement, Hardened & Polished Rolls, LED Readout, Cone Device, 220V In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote HRM 1550x90 5' x 14 Ga Initial Pinch Roll with Hydraulic Bending Roll movement, Hardened & Polished Rolls, LED Readout, Cone Device, 220V In Stock! ​ In-Stock/Special $ CALL OR EMAIL Request-A-Quote IRM 1550x110 5' x 12 Ga Initial Pinch roll with Hardened & Polished Rolls, LED Readout, Cone Device, Powered Up/Down Bending Roll (220V) List: $15,100 ​ Request-A-Quote IRM 1550x140 5' x 9 Ga Initial Pinch roll with Hardened & Polished Rolls, LED Readout, Cone Device, Optional Motorized Bending Roll, 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-H 1270x100 4' x 12 Ga. Initial Pinch Plate Roll with Hydraulic Bending Roll & Pinch Roll movement, Hardened Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-H 1270x100 4' x 12 Ga. Initial Pinch Plate Roll with Hydraulic Bending Roll & Pinch Roll movement, Hardened Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-H 1270x130 4' x 3/16" Initial Pinch Plate Roll with Hydraulic Bending Roll & Pinch Roll movement, Hardened Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-H 2050x200 6' x ⅜" Initial Pinch Plate Roll with Hydraulic Bending Roll & Pinch Roll movement, Hardened & Polished Rolls, 2 LED Readouts, Cone Device, 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-S 2050x180 6' x 5/16" Initial Pinch Plate Roll with Powered Bending Roll & Pinch Roll movement, Hardened & Polished Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-S 2550x200 8' x 5/16" Initial Pinch Plate Roll with Powered Bending Roll & Pinch Roll movement, Hardened & Polished Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-S 1550x150 5' x 3/16" Initial Pinch Plate Roll with Powered Bending Roll & Pinch Roll movement, Hardened & Polished Rolls, 2 LED Readouts, Cone Device 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-S 1550x170 5' x ¼" Initial Pinch Plate Roll with Powered Bending Roll & Pinch Roll movement, Hardened Rolls, LED Readout, Cone Device, 220V In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-S 2050x130 6' x 10 Ga Initial Pinch Plate Roll with Powered Bending Roll & Pinch Roll movement, Hardened Rolls, LED Readout, Cone Device, 220V SN: 62144. SOLD ! In-Stock/Special $ CALL OR EMAIL Request-A-Quote MRM-H 1270x150 4' x 1/4" Ga Initial Pinch Plate Roll, polished Roll, 3 LED Readout, Hydraulic Bend and Pinch, 220V In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote BACK TO TOP EAGLE BENDING MACHINE SECTION BENDERS PLATE ROLLS VBH Series HT Series HRM-IRM-MRMSeries PLATE BENDING ROLLS MACHINES DESCRIPTION STATUS / PRICE TUBE & PIPE BENDERS ORNAMENTAL BENDERS PLUS REBAR BENDERS & SHEARS PLATE ROLLS ANGLE ROLLS IRM Series MRM Series BACK TO TOP 302HV 1¾ " ANGLE ROLL, Double Pinch, 2 LEDs, Universal Tooling, 220V Arriving Soon! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 303HV 2" ANGLE ROLL, Double Pinch, 2 LEDs, Universal Tooling 220V 3 20V/3/60Hz S/N 3031987 and S/N 3031988. Arriving Soon! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 303CN3.1V 2" ANGLE ROLL, Double Pinch, Universal Tooling. FULL CNC controls with Direct Radius Input Arriving Soon! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 304HV 2½ " ANGLE ROLL, Double Pinch, 2 LEDs, Universal Tooling, 480V & 220V In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 304CN3.1V 2½ " ANGLE ROLL, Double Pinch, Universal Tooling. FULL CNC controls with Direct Radius Input, 220V In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 305HV 3" ANGLE ROLL, Double Pinch, 2 LED Readouts, Universal Tooling, 480V, 220V (s/n 1395 - 220V) In Stock! More on the way! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 305CN3.1V 3" ANGLE ROLL, Double Pinch, Universal Tooling. FULL CNC controls with Direct Radius Input. Arriving Soon! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 307HV4 4" ANGLE ROLL, Double Pinch, 2 LEDs, Universal Tooling, Hydraulic Lateral Guides, Variable Speed, 480V In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote 307HV4CN3.1V 4" ANGLE ROLL, DEMO UNIT, Double Pinch, 2 LEDs, Universal Tooling, Hydraulic Lateral Guides, Variable Speed, 480V SOLD! Request-A-Quote 308HV4 5 " ANGLE ROLL, Double Pinch, 2 LEDs, Variable Speed, Universal Tooling, Hydraulic Guides, 480V CALL OR EMAIL ​ Request-A-Quote G50HV Hydraulic Adjustment, 3 Driven Rolls, LED Readout, 220V (Special Pricing Incentive. One In-Stock at this price) In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote ANGLE ROLLS ANGLE ROLLS 304 Series 305 Series G Series 303 Series MACHINES DESCRIPTION STATUS / PRICE SPECIAL INVENTORY ACQUISITION BACK TO TOP MACHINES DESCRIPTION STATUS / PRICE PK-20 1" UNIVERSAL SECTION ROLL, Pyramid, 2 Driven Rolls, price includes floor mount stand, Vertical Operation, Universal Tooling, 220V SN: 27200 In Stock! List:$3,750 ​ Request-A-Quote PK-35F 2" UNIVERSAL SECTION ROLL, Pyramid, 2" Shafts 2 Driven Rolls, Universal Tooling, LED Readout, Horiz/Vert operation, Manual Adjust Top Roll, 220V In Stock! List:$8,950 SPECIAL: $7,750 Request-A-Quote HPK-50 2" UNIVERSAL SECTION ROLL, Pyramid, 3 Driven Rolls, Universal Tooling, LED Readout, Horiz/Vert operation, 220V In Stock! List: $15,790 SPECIAL: $13,790 Request-A-Quote HPK-60 2-1/2" UNIVERSAL SECTION ROLL, Pyramid, 3 Driven Rolls, Universal Tooling, LED Readout, Horizontal/Vertical operation, 220V & 480V In Stock! List: $20,350 SPECIAL: $17,990 Request-A-Quote HPK-80 3" ANGLE ROLL Double Pinch, 3 Driven Rolls, Universal Tooling, 2 LED Readouts, In Stock! List: $32,900 CALL OR EMAIL Request-A-Quote HPK-80HG 3" ANGLE ROLL Double Pinch, 3 Driven Rolls, Universal Tooling, 2 Way Hydraulic Lateral Guides, 2 LED Readouts, 220V CALL OR EMAIL Request-A-Quote HPK-100 4" ANGLE ROLL Double Pinch, 3 Driven Rolls, Universal Tooling, Hydraulic Guides, Variable Speed, 2 LED Readouts 480V In Stock! SPECIAL: $64,200 CALL OR EMAIL Request-A-Quote PLANET-30 5” ANGLE ROLL, Double Pinch, CNC Controls, Hydraulic Lateral Guides, Horizontal/Vertical Operation, Variable Speed, 480V In-Stock/Ex-Works! CALL OR EMAIL Request-A-Quote PLANET-35 5" ANGLE ROLL, Double Pinch, Digimatic Programmable Controls, Hydraulic Lateral Guides, Horizontal/Vertical Operation, Variable Speed, 480V In-Stock/Ex-Works! CALL OR EMAIL Request-A-Quote PLANET-45 6” ANGLE ROLL, Double Pinch, CNC Controls, Hydraulic Lateral Guides, Horizontal/Vertical Operation, Variable Speed, 480V In-Stock/Ex-Works! CALL OR EMAIL Request-A-Quote PLANET-60 8” ANGLE ROLL, Double Pinch, CNC Controls, Hydraulic Lateral Guides, Horizontal/Vertical Operation, Variable Speed, 480V In-Stock/Ex-Works! CALL OR EMAIL Request-A-Quote SPECIAL AQUISITION TUBE & PIPE TUBE & PIPE BENDERS BACK TO TOP MACHINES DESCRIPTION STATUS / PRICE ETM-60HD PIPE/TUBE BENDER, 1 ½” Sch40 Pipe. Digital Programming, 220V, 3-Phase In Stock! SN: B22105 In-Stock/Special $ CALL OR EMAIL Request-A-Quote ETM-80HD PIPE/TUBE BENDER, 2 ½ Sch40 Pipe. Digital Programming, 220V, 3-Phase S/N 23104,23108,23109 In Stock! In-Stock/Special $ CALL OR EMAIL Request-A-Quote ETM-90HD PIPE/TUBE BENDER, 3" Sch40 Pipe. Digital Programming, Standard Speed Drive: 220V-3-60Hz, Coming Soon! In-Stock/Special $ CALL OR EMAIL Request-A-Quote ETM60HD ETM80HD ETM90HD BACK TO TOP ORNAMENTAL BENDERS PLUS REBAR BENDERS & SHEARS ORNAMENTAL BAR WORKERS E-MATIC MACHINES DESCRIPTION STATUS / PRICE E-MATIC CE/CN MULTI-USE ROTARY BENDER, 5 Machines in 1, Digital Programming, Scroll, Fold, Bend up to 1" bar capacity, In Stock! SN:23106 In-Stock/Special $ CALL OR EMAIL Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE TP-32/36 REBAR BENDER/SHEAR COMBINATION, shear to #7, bend to #8 bar, 6 Bend Memory, double bend capable, portable on wheels with formers & pin kit, safety shield, foot pedal, 220V-3-60Hz. In Stock! List $9,990 SPECIAL:$8,500 Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE TP-40/46 REBAR BENDER/SHEAR COMBINATION, shear to #9, bend to #10 bar, 6 Bend Memory, double bend capable, portable on wheels with formers & pin kit, safety shield, foot pedal, 220V-3-60Hz. In Stock! List $12,990 SPECIA L:$11,200 Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE C-44 Up to Rebar Yard Shear, shear to #10 bar or 3 ea. #5 bars, 8 edged shear blades, portable on wheels, safety shield, 220V-3-60Hz. In Stock! List $8,550 SPECIA L :$7,500 Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE P-38 Rebar Bender, to #8 bar, 6 Bend Memory, double bend capable, portable on wheels with formers & pin kit, safety shield, foot pedal, 220V-3-60Hz. In Stock! List $9,300 SPECIA L :$8,000 Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE P-44 Rebar Bender, to #10 bar, 6 Bend Memory, double bend capable, portable on wheels with formers & pin kit, safety shield, foot pedal, 220V-3-60Hz. In Stock! List $10,300 ​ Request-A-Quote MACHINES DESCRIPTION STATUS / PRICE P-54 Rebar Bender, to #11 bar, 6 Bend Memory, double bend capable, portable on wheels with formers & pin kit, safety shield, foot pedal, 220V-3-60Hz. In Stock! List $11,250 SPECIA L :$9 ,900 Request-A-Quote HORIZONTAL PRESSES BACK TO TOP T40-DIGIT COOL 40 TON BULLDOZER PRESS, With 1 Axis NC Programmable Control, 220V-3-60Hz SN: 2582 Special Fabtech 2023 Pricing Incentive NOW In Stock! List: $32,500 SPECIAL:$25,750 Request-A-Quote T40-TOOLING TOOLING PACKAGE including special pins, 6-1/4” height Punch & Die Holders, 6-1/4” height 60° Swan Neck Punch, 6-1/4” height 90° “V” die block, Reinforcing Stirrup for 6-1/4” height tooling Sold w/Machine List: $5,275 SPECIAL:$3,800 Request-A-Quote CLICK HERE to take advantage of our Specials Today! or Call (251)937-0947 Availability and Pricing are subject to change without prior notice. Inventory changes daily/weekly. Pricing and shipping costs are fluid. Carell Corporation reserves the right to make modifications as needed and cannot be held liable for postings, transcription and clerical errors TUBE & PIPE ROLLS SPECIALS Ask your Sales & Application Engineer at Eagle or Carell about any promotional tube & pipe roll tooling offers as they change from time to time and vary by machine model! REV:02.23.23 HORIZONTAL PRESSES MACHINES DESCRIPTION STATUS / PRICE T40 DIGITCOOL

BACK TO TOP TUBE & PIPE BENDERS Click Image or Scroll Down for descriptions, standard equipment, options & technical specifications CARELL In-Stock Specials Request-A-Quote Tube & Pipe bending procedures like “press bending” or “rotary draw bending” are used to form the work piece into the shape of a die . Straight tube stock can be formed using a bending machine to create a variety of single or multiple bends and to shape the piece into the desired form. ​ - More About Tube & Pipe Bending - ETM SERIES ETM SERIES The ETM series is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction. The range in diameter is from 1/2 inch up to 3 inches and can make curves over 180° with top finish quality for a minimum bending radius of 3 x the tube diameter. Thanks to our new “Digital Bend Programming Touch Screen”, these machines are extremely easy to use: it enables selection of up to 99 programs each of them with a 5-stop sequence in the bending operation with automatic adjustment for material springback. Moreover, it can also save and store each project as a repeatable program. ETM60HD ETM-60HD Request-A-Quote BACK TO TOP ETM80HD ETM-80HD Request-A-Quote BACK TO TOP ETM90HD ETM-90HD Request-A-Quote BACK TO TOP ETM120 ETM-120HD Request-A-Quote BACK TO TOP ETM150 ETM-150HD Request-A-Quote BACK TO TOP PEDRICK ROTARY COMPRESSION BENDERS Request-A-Quote BACK TO TOP Carell Corporation is proud to be a National Distributor of Pedrick Rotary Compression Benders! Pedrick Tool & Machine Co. founded in 1875 in Philadelphia,PA, developed our line of rotary compression bending machines for shipbuilding, petro-chemical, industrial and maintenance applications worldwide using the most advanced materials and components in machine construction for bending heavy wall tube, pipe and structural sections. The line includes 12 models to serve all budgets and applications. Bends produced on a 3D bend radius meet American Petroleum Institute (API) specifications for ovality (flattening) and wall thinning. THE CONCEPT: The Rotary Compression Bending Principle uses a stationary forming die and a powerful wiper arm that rotates around the die which pulls the work piece around the die to create the bend. The wiper arm locks into the rotating top plate. A variety of structural, roll formed and extruded sections can also be formed using the rotary compression process saving time and money! STANDARD EQUIPMENT: These Pedrick machines have a work surface and rotating top plate in heavy normalized steel plate mounted on a solid cast or alloy steel base frame. The bending arm is powered by an electric self braking, brushless SEW-Eurodrive right angle motor reduction unit mounted under the table. Bend cycle is controlled by a reversing contactors, motor overload protection modules and a control transformer, all which meet NEC, JIC and UL specifications. Switchgear is enclosed in a NEMA style cabinet complete with an external, Lock-Out/Tag-0ut fused disconnect. Adjustable limit switches and hand held controls are standard. Features: (click for pdf) • Mechanically driven. (No hydraulics or pneumatics are used to bend pipe or tube) • Heavy Duty Cast Iron or Steel Housing • Helical Bevel Gear Reducer with a TEFC Motor & Brake • Heat Treated Alloy Shafts • Spherical Roller Bearings • NEMA 12 Control Box Meets NEC JIC Specs • Limit Switch For Angle Selection and Automatic Reverses Advantages: • Quick tool changeovers • Adjustable limit switches • Requires minimal maintenance • 12 Models and Portable units available! Options: • Tooling is optional and quoted according to production needs • Digital controls are optional to substitute manually adjusted limit switches • Machine Voltages can be arranged for any country or electrical grid. (click chart for pdf) Machines are shipped direct from our facility to your location after extensive testing by our factory trained mechanics UNI SERIES-MANDRELESS UNI SERIES TUBE & PIPE BENDERS Mandreless Models: UNI-42 UNI-60 UNI-63 UNI-70/C UNI-76 UNI-89 Rotary Benders built for durability, constructed in steel yet economically priced and designed with compact footprints, quick change tooling system and are digitally programmable for precision repeatability. Request-A-Quote BACK TO TOP UNI-42 BENDER 3/4" Mandreless Rotary Tube & Pipe Bender Digitally Store 9 Programs with up to 9 Bends Each Single Speed Bending Electric Powered Rotary Drive, 220V, Single Phase Only OPTIONS Tube & Pipe Tooling and Kits, Plane of Bend Positioners UNI-60 BENDER 1-1/2" Mandreless Rotary Tube & Pipe Bender Digitally Store 9 Programs with up to 9 Bends Each Single Speed Bending Electric Powered Rotary Drive, 220V, Single Phase Only OPTIONS Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories UNI60 UNI-60 Combi-Cal 1-1/2" Mandreless Rotary Draw & Roll Bender Digitally Store 9 Programs with up to 9 Bends Each Single Speed Bending Electric Powered Rotary Drive, 220V, Single Phase Only OPTIONS Tube & Pipe Tooling and Kits, Plane of Bend Positioners UNI-63 BENDER 1-1/2" Mandreless Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Dual Speed Bending Electric Powered Rotary Drive, 220/460V, 3 Phase OPTIONS Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories UNI-70/C BENDER 2" Mandreless Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Dual Speed Bending Electric Powered Rotary Drive 2 Drive Arbor Sizes Supplied UNI-76 BENDER 2-1/2" Mandreless Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Dual Speed Bending Electric Powered Rotary Drive 3 Drive Arbor Sizes Supplied OPTIONS Tube & Pipe Tooling and Kits Tight Radius Accessories UNI-89 BENDER 3" Mandreless Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Dual Speed Bending Electric Powered Rotary Drive 3 Drive Arbor Sizes Supplied OPTIONS Tube & Pipe Tooling and Kits Tight Radius Accessories UNI SERIES-MANDREL Request-A-Quote U NI MANDREL TYPE ROTARY TUBE / PIPE BENDERS Mandrel Models: UNI-70/HC UNI-80 UNI-90 Rotary Benders built for durability, constructed in steel yet economically priced and designed with compact footprints, quick change tooling system and are digitally programmable for precision repeatability. BACK TO TOP UNI-70HC BENDER 1-1/2 " Mandrel Type Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Hydraulic Clamps, Programmable Hydraulic Mandrel Extraction, Programmable OPTIONS Mandrel Bending Tooling & Accessories Mandrel Bed Lengths from 5’, 8’, 11’, 15’ & 18’ UNI-80 BENDER 2 " Mandrel Type Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Hydraulic Clamps, Programmable Hydraulic Mandrel Extraction, Programmable Dual Speed Bending, Electric Powered Rotary Drive OPTIONS Mandrel Bending Tooling & Accessories Mandrel Bed Lengths from 5’, 8’, 11’, 15’ & 18’ UNI-90 BENDER 2-1/2 " Mandrel Type Rotary Tube & Pipe Bender Digitally Store 50 Programs with up to 9 Bends Each Hydraulic Clamps, Programmable Hydraulic Mandrel Extraction, Programmable Dual Speed Bending, Electric Powered Rotary Drive OPTIONS Mandrel Bending Tooling & Accessories Mandrel Bed Lengths from 5’, 8’, 11’, 15’ & 18’ ​ ​ BACK TO TOP

BACK TO TOP VBH Technology Active Extended Diagnostic Everything is under control Are you loosing production hours and days checking around the machine for which connection wire, PLC card, push-button or fuse are faulty?… Forget these kind of problems with PARMIGIANI's i-Diagnostic system for immediate fault detection. The i-Diagnostic is a revolutionary diagnostic system that supervises all the main functions of the machine, with an easy to use and intuitive control panel interface. From the touch-screen you can control almost all electrical connections around the machine; all PLC modules; all micro-switches (You can check also if they are engaged /energized or not) and more....i-Diagnostic: a revolution in customer support. Instantaneous fault detection instead of troubleshooting Detailed information on type and location of the fault VBH Technology I-DIAGNOSTIC The PPS is the most advanced parallelism system available on the market today. The rolls parallelism in a plate bending machine is a key factor for production accuracy. The capability to maintain precision over years of performance is also another critical point. For this reason we employ the best of today's available technology with digital control systems and hydraulic flow control via proportional valves. We have designed a system resistant to wear that will give you years and years of trouble free performance, keeping the machine positioning precision just like your first day of operation! The top and bottoms rolls parallelism is fully controlled by a digital “high speed” FIELD BUS system. The package includes a set of hydraulic proportional valves with high performance digital control cards, matching the high speed of the FIELD BUS system. This digital technology (the loop control is 20 times faster than PLC-based electronic controls) joined with the hydraulic proportional valves, provides a parallelism precision of about 0.1 mm. Parallelism System Digital control technology with hydraulic proportional valves Parallelism precision 0.1 mm BACK TO TOP PPS HYDROTRONIC Plug and play technology Do It by yourself "Assemble and plug in – that’s all!" Quick and simple plug connections replace elaborate wiring. • Avoids wiring errors • Shortens start-up time • Quick swapping of cables  The wiring of the machine is achieved by Plug and Play connectors and digital distributors. The cabling system with connectors is more reliable over time, resistant to environmental contamination and vibration and allows for quick and easy maintenance. With our FACILE® Plug and Play system you can change a wiring connection (to the hydraulic valves or the encoders or potentiometers, to a micro-switch etc…) with pin plug connector, without unscrewing any electrical wire. Same procedure for all PLC modules! Without the need of a skilled electrician! With the purpose of increasing your independence from third parties all software are loaded in static memory cards, (like the ones used in digital video cameras) and not in volatile Eprom! This means that you will almost never lose the software, even when you need to change the PLC unit. Our plug-play system is a military approved technology! Digital control technology with hydraulic proportional valves Parallelism precision 0.1 mm Advanced Wiring System BACK TO TOP FACILE Advanced Hydraulic System Infinitely variable adjusting speeds Infinitely variable bending pressure BACK TO TOP The hydraulic system is the operative core of your VBH: it runs everything from the bending rolls drive to the bending rolls movement, tilting and all other machine attachments. This is why we invested a lot in research and development to give you a smooth, precise and highly responsive system. Through digital controls the system is managed by dedicated hydraulic proportional valves (pressure and flow) that allows you to select the most convenient speed during each production step (vs. other brands machines that give you only one or two selectable speeds) and the maximum central lower roll pinching force in order to adapt it to the characteristics of the plate being worked. The possibility to select low pressures for thin plates widely extends the range of the machine. With infinitely variable pressure and speed adjustment the operator will have full control of the process in any bending situation. HI-TECH HYDRAULIC

CARELL In-Stock Specials Request-A-Quote Series PDF Brochure 304HV Specification Chart 304HV DOUBLE PINCH ANGLE ROLL Precision Engineered for Dependability Backed by the Best Guarantee in the Industry! Angle 2-1/2" • Pipe 2" • Flats 4" Capacities* Flats Hard: 2-3/4 x 1/2" Ø28 Flats Easy: 4" x 1" Ø26 Pipe Schedule 40: 2" Ø24 Angle Leg-In: 2" x 5/16" Ø30 *with standard equipment CARELL's 304HV double initial pinch universal bending machines are available with independent hydraulic adjustment of both lateral bending rolls and powered rotation of all three bending rolls. This versatile unit is ideal for rolling standard/special sections as well as tube and pipe in mild-structural-stainless steels, aluminum, brass, copper and other materials. Machines are furnished with a set of standard universal rolls. Standard Features Dual L ED Digital Displays monitor bending roll positions Double Pinch G eometry permits pre-bending of leading & trailing ends of the profile without removal from the machine Telescoping modular multi-component roll set specifically designed to bend standard sections including angle leg-in/out and square/rectangular tube, as well as other shapes in a variety of material types Tri-Directional Lateral Guides with cam rollers for correcting inherent twist when rolling angle leg-in Operates in both horizontal and vertical orientations Options Rolls for tubes pipes, and special profiles Tooling for production of half tubes Overhead Supports for coil production Compression and Tension tooling for C, & I hard way NC and CNC Controls with various automation levels for repetitive jobs and production of variable radius bends and parts with multiple bends Powered Movements on lateral material guides on models 302HV through 307HV LED digital displays for movements on lateral material guides ​

BACK TO TOP Join the ranks of fabricators both large and small worldwide who have increased quality and production rates while reducing costs ​ HYDRAULIC IRONWORKER MACHINES Carell's Universal Hydraulic Ironworking Machines, models MX340G and MX700 , provide versatility of function and capability to punch, shear, bend, emboss, notch, cope, press and flatten various section types and materials. These machines can be used with a wide assortment of tooling, even tools fabricated by the customer. An Easy-To-Use Essential Machine for Any Metal Working Shop STANDARD EQUIPMENT: All Carell Hydraulic Universal Ironworking Machines are equipped with one pair of hole punch and die along with the punch and die holder collars. A vast array of accessories and tools are available as options. Over 40 tool type stock designs are available TOOLING OPTIONS: Over 40 tool stock design tool types are available such as; Punching tools for flat stock, tube, structural profiles; Notching tools for sheet, round & square tube, structural profiles; Bending & Folding punches and V-dies for sheet and bar: Ventilation slot punch & embossing tools; Flattening & Shearing tools to manufacture finial spear and rounded points for fencing and brackets as well as many MORE...! MX340G 40 Ton Industrial Hydraulic Ironworker Features: • Swinging front safety shield • Foot pedal and push button activation • LCD digital display • Parts and stroke counters • Diagnostic routine and alarms • 7" (180mm) Throat depth • 4" (100mm) Ram stroke • 9.6" x 10.4" Work-piece holder • 3 HP Hydraulic pump motor • 1,353 lbs dry weight Advantages: • Quick change tool holders • Adjustable ram stroke limits • Unlimited tooling possibilities • Compact and easily portable • 3 Year Parts Limited Warranty MX700 70 Ton Industrial Hydraulic Ironworker ​ Features: • Swinging front safety shield • Foot pedal and push button activation • LCD digital display • Parts and stroke counters • Diagnostic routine and alarms • 13.75" (350mm) Throat depth • 6.30" (160mm) Ram stroke • 23.6" x 13.8" Work-piece holder • 7.5 HP Hydraulic pump motor • 4,400 lbs dry weight Advantages: • Quick change tool holders • Adjustable ram stroke limits • Unlimited tooling possibilities • Built-in fork pockets for portability • 3 Year Parts Limited Warranty Hydraulic Punching and Shearing Machine NARGESA MX340G How To Make Parts with the NARGESA MX700 This item is Out-of-Stock and discontinued. Please contact us at 1-251-937-0947 for further options. Our Application Engineers are here to assist you with your project goals Thanks for your interest. Information Request

CARELL Dishing and Flanging Machines For Tank Head Forming Request-A-Quote By PARMIGIANI Parmigiani is a world leader manufacturer in the production of tank heads forming machines. Thanks to the feedback of our customers and our dedication to quality we are introducing the most advanced and powerful machines we've ever built. Parmigiani manufactures complete lines to produce dished ends for tanks and pressure vessels consisting of Hydraulic dishing presses equipped with manipulators for automatic indexing of round blanks and Flanging machines for ends with or without center-hole. Thanks to the continuous technological improvement our Dishing and Flanging machines are preferred by the world leading professional dished heads manufacturers. For More Information Call or Email Us Today! [email protected] ​

CARELL 3000 Series Hydraulic Angle Rolls , O ur 3000 series of Angle Rolls has Become the Industry Standard for a New Generation of Highly Efficient & Versatile Machines with Unparalleled Standard Features OVERVIEW: ANGLE ROLLS CARELL In-Stock Specials Request-A-Quote The Carell 3000 series of angle rolls gives fabricators a wide range of choices from small footprint to large plant equipment, all designed for long life, reliability, consistent fabrication output, and heavy-duty application. This is particularly beneficial when companies and clients need angle rolls for applications where the workspace is limited in size and scope. When you need manufacturing equipment that is going to deliver consistently, get the right choice for your shop or production line the first time… Start with Solutions from Carell. GALILEO SERIES 302HV 303HV 304HV 305HV 308HV 306HV 309HV 307HV 310HV4 311HV4 312HV4 314HV4 MIGNON SERIES Scroll Down to Click Images & Links for descriptions of standard equipment, options & technical specifications Note: CNC Control option requires external compressed air supply for the pneumatic actuated encoder, 75 to 80 psi 3000 SERIES ANGLE ROLLS 302HV thru 304HV Series BACK TO TOP 302HV Angle 2" Pipe 1-1/4 " - F lats 2-3/8" 303HV Angle 2- 1/4" Pipe 1-1/2 " - Flats 3" 30 4HV Angle 2-1/2 " Pipe 2" - Flats 4" 302HV-304H 305HV thru 308HV Series 305HV Angle 3 " Pipe 2 -1/2 " - Flats 5" 306HV Angle 3 -1/2 " Pipe 3" - Flats 6 " 307HV Angle 4" Pipe 4" - Flats 7" 308HV Angle 4 -1/2 " Pipe 5" - Flats 8" BACK TO TOP 305HV-308H 309HV thru 311HV4 Series 309HV Angle 5" Pipe 6" - Flats 9" 310HV4 Angle 6" Pipe 6" - Flats 10" BACK TO TOP 311HV4 Angle 6" Pipe 8" - Flats 12" 309HV-311HV4 GALILEO & MIGNON Series BACK TO TOP G50 Angle 2- 1/2 " Pipe 2" - Flats 4-1/2 " G80 Angle 3 " Pipe 3 " - Flats 6 " Model-00 Tube 3/8 " - Flats 3/4 " Model-025 Tube 7 /8 " - Flats 1-1/2 " 312HV4 Angle 8" Pipe 10" - Flats 16" 314HV4 Angle 10" Pipe 12" - Flats 20" 312HV4 & 314HV4 Series BACK TO TOP 312HV-314HV GALILEO-MIGNON

Innovation, Quality & Performance Backed By Decades Of Experience 251-937-0947 Career Opportunities Click The Image Link Above To See The Available Job Opportunities At Carell Corporation & Eagle Bending Machines, Inc.

BACK TO TOP The Powerful and Reliable Choice Full Frame Extended Design Parmigiani plate rolls have the most heavily sized frame you can find in the market. Unlikely slim frames covered with thin thickness plates that you can find on all machines in the market, makes our frame design look definitively oversized.The exclusive full frame design withstands all bending forces and guarantees stiffness and performance throughout years of service.This unique machine frame, with extended design for added rigidity and strength, are welded fabrication. After welding all frames are stress relieved and then machined on CNC milling machines Get more with our linear guide s ALG System (Anti-friction Linear Guides) • No friction - less than swing design • Direct load to the plate • Less vertical power on top roll • Lower bending diameter The linear guide design is the only system that can grant the necessary machine stiffness and the perfect geometry for all kind of bending operations. The linear design allows a compact geometry of the machine ("minimum centerline distance between the two side rolls", impossible to obtain with the swinging design) that is essential for bending precision and accuracy. The linear design allows you to work in the best and ideal geometrical conditions when rolling high yield strength materials, reducing the shell spring back reopening effect and obtain a much smaller bending diameter when compared with the swinging design • Heavy Duty HMB Exclusive Design • Supports Cone Rolling • Permanent Lubrication Built for Heavy Work HMB System Heavy Multiple Bearings More power - More torque HTT System (High transmitted torque) Each bending roll is supported by 4 heavy-duty self-aligning spherical roller bearings (double raw type). Each bearing is oversized in order to withstand the whole bending load. Thanks to the HMB exclusive design, with four oversized bearings fitted into a swiveling housing, the roll can freely deflects along it’s full width during the rolling process. This guarantees an optimal distribution of the load on the supports even during the cone rolling process and increases the machine's reliability and life. Moreover, the multi bearing system with swiveling housing design greatly reduces the maintenance and the need for lubrication (permanent lubrication). Friction free - Maintenance free AST System Anti-friction sliding technology Each Rolls support is machined with anti-friction material in the sliding area. This system drastically reduces the maintenance and sliding friction, less than in a planetary machine. The rolls driving is realized by independent hydraulic motors via planetary gear transmission directly coupled to each driven roll. The independent rolls hydraulic drive assures and automatic speed compensation between the top and lower rolls and an optimal distribution of the torque on each roll during the working phase. The HTT system allows the best plate feeding and the highest driving torque of any competitive machine. A winning combination for those looking for performance of the highest level. VBH Options BACK TO TOP Great Options and Accessorie s Our Parmigiani VBH has a standard package of features that usually are not available even as options in other machines (like our FACILE, i-Diagnostic, calibration working mode, Servo-dynamic Active Control with infinitely variable positioning speeds of the bending rolls and active pressure control of the lower roll...) our R & D department has designed a wide range of accessories for special bending applications, like the Hydraulic cambering device for central lower roll with variable intensity for working with thin and long plates, gantry loaders, unloading devices etc. in order to increase productivity and quality of finish for special materials. OPTIONS

307HV DOUBLE PINCH ANGLE ROLL Precision Engineered for Dependability Backed by the Best Guarantee in the Industry! CARELL In-Stock Specials Request-A-Quote Series PDF Brochure 307HV Specification Chart Angle 4" • Pipe 4" • Flats 7" Capacities* Flats Hard: 4" x 1 Ø44 Flats Easy: 7" x 1-3/8" Ø32 Pipe Schedule 40: 4" Ø45 Angle Leg-In: 4" x 3/8" Ø50 *with standard equipment CARELL's 307HV double initial pinch universal roll bending machines are available with 6 way m ulti-axis adjustable lateral guides, variable speed powered rotation of all three bending rolls and i ndependent hydraulic adjustment of the lower rolls for double pre-bending. This versatile unit is ideal for rolling standard/special sections plus tube & pipe in a variety of material types. The 307HV Series Universal Roll Set is designed for bending standard profiles , flat bar (on flat and on edge), square bar, tees, channel as well as round bar, square & rectangular tube sections, angles leg-in, leg-out and can be setup to operate in horizontal or vertical position adding further value to your production. Standard Features Dual LED Digital Displays monitor bending roll positions. Rugged, rigid, one piece solid steel weldment frame , normalized and precision machined, ample sized access panels and ventilation for internal hydraulic unit. 3 Shafts Driven w/ 3 Direct Coupled Hydraulic Motors and Planetary Speed Reducers for 100% efficient torque delivery. Larger, high strength steel shafts , heat treated and ground, journaled in dual self aligning spherical roller bearings for optimum performance. Hydraulic power unit integral to the machine frame. Multi axis, 6 way, fully adjustable lateral guides. Variable Speed rotation via electronic proportional valves. Universal bending rolls with modular components , hardened and wear resistant. Operates in both horizontal and vertical orientations Options Rolls for tubes pipes, and special profiles Tooling for production of half tubes Overhead Supports for coil production Compression and Tension tooling for C, & I hard way NC and CNC Controls with various automation levels for repetitive jobs and production of variable radius bends and parts with multiple bends Powered Movements on lateral material guides on models 302HV through 307HV LED digital displays for movements on lateral material guides ​

SUPPORTER/MEMBER Carell Corporation Ornamental Metal Working Equipment Represents the Best, Most Versatile Machines Available. These machines are Built to Exacting Standards for Industrial use and Long-Term Dependability. Knowledgeable Carell Machine Specialists are also just a Phone Call away and Ready to Help You! BACK TO TOP ORNAMENTAL BENDERS CARELL In-Stock Specials Click Image or Scroll Down for descriptions, standard equipment, options & technical specifications Request-A-Quote E-MATIC E-MATIC CE/CN Ideal for Tight Bends and Special Applications CARELL In-Stock Specials Request-A-Quote The Carell E-MATIC by Memoli; incorporates a rotary bending head, a wide stable base and digital programmable controls into a uniquely versatile package. Heavy Duty, Rugged unit is compact and easy to use. Tooling changes are rapid and simple. Application of the different attachments are shown below or use of easily produced special tooling offers unlimited versatility Video: Carell E-Matic Universal Bender SPECIFICATIONS: E-MATIC UNIVERSAL BENDER Main Drive: Speed: Weight: Memory: Controls: Voltage: Dimensions: 4.50 HP 7 rpm 500 lbs 45 steps 24 VAC 220V – 3PH – 60Hz 34” x 25” x 39” h Optional "SUPER SCROLL" 20" Diameter x 5/8" Bar PF Option – Bar Brake/Folding Tooling Bend up to 1” Round Rod, 4” x 5/16” Flat Bar D Option – Bar Twisting Tooling Twist up to 7/8” Sq. 1-1/2” x 3/8” Flats CT Option – Tube Bending Tooling Bend up to 1-1/2” OD x .079 wall CS/3 Option – Scroll Tooling w/ 3 Formers Bend up to ½” Sq. or Round – 1-1/4” x ½” Flats CF Option – Curve/Radius Tooling Bend up to 1” Round Rod, 2” x 9/16” Flat Bar BACK GALILEO G50 Heavy Duty - Up to 2" Pipe Capacity CARELL In-Stock Specials Request-A-Quote The G50HV Series are Heavy Duty, 3 Roll Universal Bending Machines with SOLID STEEL WELDED FRAMES, LED Readouts, high strength shafts and ALL 3 ROLLS DRIVEN through heavy duty drive trains for high torque delivery and energy efficiency. Video: G50 Universal Bender-Ornamental Options 3 Rolls Driven: Heavy Duty Drive Train Scroll Tool: 1-1/2 x 3/16 Scrolled on Flat Bar Twist Tooling:up to 7/8” Sq. and 1-1/2” x 3/8” Flat Bar Bar Brake Spiral Tool G50-HV Specification Chart BACK G50 ORNAMENTAL

BACK TO TOP CORNER NOTCHING MACHINES Request-A-Quote Carell / SIMASV Hydraulic Corner Notching Machines use a patented self regulating gap adjustment which permits perfect shearing of both thin and thick materials without need of operator intervention. Machines are heavy duty and the work bed is constructed of GS500 Cast Alloy, precision machined and stress relieved. Lower frame is constructed of heavy steel tube and sheet. Several styles are available: AF - Fixed Angle, AF/P - Fixed Angle with Punch, AV - Variable Angle and AV/PA Variable Angle with Punch Units are capable of cutting from the apex of the notch or from the end. The machine bed is machined with dovetail slots to accept squaring arms, spring loaded sheet stops, side extensions or other accessories. Graduated reference scales are recessed in the bed. Vertical stroke tolerance is maintained by using two precision ground and hardened guideposts working through a heavy, oversized cast head structure. Head is also slotted to accept spring loaded optional sheet hold-downs. Each machine is furnished with a pair of blades, a pair of adjustable sheet squares, stroke limit adjustment, waste chute, foot pedal, service tool kit and instruction manual. A wide variety of optional equipment is available. All units are 3 phase and voltage must be specified on ordering. NEW! AV226/PA-CNC NOTCHER Extraordinary cutting precision equal to 0.1 ° Automation is often the answer to accelerating production. For this, S.I.M.A.S.V. has added NC capabilities to a variety of its models. For example, their latest innovation is the 30 ° >140 ° variable-angle hydraulic notching machine AV226/PA-CNC. It has been designed with system-regulating blades by means of an NC electronic control integrated to the machine. This notcher was in fact designed to meet the strict accuracy requirement of the customer European Space Research & Technology Center – ESTEC The AV226/PA-CNC model distinguishes itself from the other notchers in the market because its blades are moved singularly and controlled by an electronic NC. Thanks to this system, the machine achieves an extraordinary cutting precision equal to 0.1 ° A wide range of optional and customized equipment enhances the extensive standard equipment of the machine AF/B Fixed Angle AF 226/B Notching 0.220 Capacity + 8.66 Blades + 90° Angle AF 226/B Notching 0.300 Capacity + 8.66 Blades + 90° Angle AF/P Fixed Angle with Punch Notching 0.300 Capacity + 9.84 Blades + 90° Angle Punching 1.125 x 11Ga BACK TO TOP AV/B Variable Angle AV 224/B Notching 10 Ga Capacity + 8.66 Blades + 30° to 140° Angle AV 226/B Notching 0.220 Capacity + 8.66 Blades + 30° to 140° Angle AV/PA Variable Angle with Punch AV 224/PA Notching 10Ga Capacity + 8.66 Blades + 30° to 140° Angle Punching 1.125 x 12Ga AV 226/PA Notching 0.220 Capacity + 8.66 Blades+ 30° to 140° Angle Punching 1.125 x 11Ga LC & AV Series Several Models with capacity up to 3/8 Plate, call for Information ​ BACK TO TOP