google-site-verification: googlefde2938ea54d7d44.html Tube & Pipe Benders | Carell Corporation
top of page
BACK TO TOP
TUBE & PIPE BENDERS

Click Image or Scroll Down for descriptions,

standard equipment, options & technical specifications

Tube & Pipe bending procedures like “press bending” or “rotary draw bending” are used to form the work piece into the shape of a die. Straight tube stock can be formed using a bending machine to create a variety of single or multiple bends and to shape the piece into the desired form.

Plate Roll
Tube-Pipe-2021C.
Pipe Bender
Tube and Pipe Bender
Metal
fabrication
shop
metal fabrication
Davi
Revolution Machine
Pipe
Bender
Tube B
Tube and pipe bender
Manufacturing
Tube Bender
See Our 3000 Series Angle Rolls
ETM SERIES
ETM SERIES

The ETM series is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction. The range in diameter is from 1/2 inch up to 3 inches and can make curves over 180° with top finish quality for a minimum bending radius of 3 x the tube diameter.

 

Thanks to our new “Digital Bend Programming Touch Screen”, these machines are extremely easy to use: it enables selection of up to 99 programs each of them with a 5-stop sequence in the bending operation with automatic adjustment for material springback. Moreover, it can also save and store each project as a repeatable program.

ETM60HD
ETM-60HD-2021.
ETM80HD
ETM-80HD-2021.
ETM90HD
ETM-90HD-2021.
ETM120
ETM-120HD-2022.
ETM150
ETM-150HD-2021
PEDRICK
ROTARY COMPRESSION BENDERS

Carell Corporation is proud to be a National Distributor of Pedrick Rotary Compression Benders!

Pedrick Tool & Machine Co. founded in 1875 in Philadelphia,PA, developed our line of rotary compression bending machines for shipbuilding, petro-chemical, industrial and maintenance applications worldwide using the most advanced materials and components in machine construction for bending heavy wall tube, pipe and structural sections. The line includes 12 models to serve all budgets and applications.

Pedrick Series Pipe Bender

Bends produced on a 3D bend radius meet American Petroleum Institute (API) specifications for ovality (flattening) and wall thinning.

 

 

THE CONCEPT:The Rotary Compression Bending  Principle uses a stationary forming die and a powerful wiper arm that rotates around the die which pulls the work piece around the die to create the bend. The wiper arm locks into the rotating top plate. A variety of structural, roll formed and extruded sections can also be formed using the rotary compression process saving time and money!

 

STANDARD EQUIPMENT: These Pedrick machines have a work surface and rotating top plate in heavy normalized steel plate mounted on a solid cast or alloy steel base frame. The bending arm is powered by an electric self braking, brushless SEW-Eurodrive right angle motor reduction unit mounted under the table. Bend cycle is controlled by a reversing contactors, motor overload protection modules and a control transformer, all which meet NEC, JIC and UL specifications. Switchgear is enclosed in a NEMA style cabinet complete with an external, Lock-Out/Tag-0ut fused disconnect. Adjustable limit switches and hand held controls are standard.

Features: (click for pdf)

• Mechanically driven. (No hydraulics or 

  pneumatics are used to bend pipe or tube)

• Heavy Duty Cast Iron or Steel Housing

• Helical Bevel Gear Reducer 

  with a TEFC Motor & Brake 

• Heat Treated Alloy Shafts

• Spherical Roller Bearings

• NEMA 12 Control Box Meets NEC JIC Specs

• Limit Switch For Angle Selection and 

  Automatic Reverses

Advantages:

• Quick tool changeovers

• Adjustable limit switches

• Requires minimal maintenance

• 12 Models and Portable units available!


Options:
• Tooling is optional and quoted according 

   to production needs

• Digital controls are optional to substitute 

   manually adjusted limit switches

• Machine Voltages can be arranged for any 

   country or electrical grid.

PEDRICK CHART-2023

Machines are shipped direct from our facility to your location after extensive testing 
by our factory trained mechanics

UNI SERIES-MANDRELESS

UNI SERIES TUBE & PIPE BENDERS
 

Mandreless  Models:  UNI-42  UNI-60  UNI-63  UNI-70/C  UNI-76  UNI-89
 

Rotary Benders built for durability, constructed in steel yet economically priced and designed with compact footprints, quick change tooling system and are digitally programmable for precision repeatability.

UNI42-001

UNI-42 BENDER 3/4" 

Mandreless Rotary Tube & Pipe Bender

Digitally Store 9 Programs with up to 9 Bends Each

Single Speed Bending

Electric Powered Rotary Drive, 220V, Single Phase Only


OPTIONS 

Tube & Pipe Tooling and Kits, Plane of Bend Positioners

UNI-60 BENDER 1-1/2" 

Mandreless Rotary Tube & Pipe Bender

Digitally Store 9 Programs with up to 9 Bends Each

Single Speed Bending

Electric Powered Rotary Drive, 220V, Single Phase Only


OPTIONS 

Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories

UNI60
UNI60 Tube & Pipe Bender
UNI60-001.
uni60combical-001b
UNI63speed-001b.
UNI70/C Tube & Pipe Bender
UNI76 Tube & Pipe Bender
UNI89 Tube & Pipe Bender

UNI-60 Combi-Cal 1-1/2" 

Mandreless Rotary Draw & Roll Bender

Digitally Store 9 Programs with up to 9 Bends Each

Single Speed Bending

Electric Powered Rotary Drive, 220V, Single Phase Only


OPTIONS 

Tube & Pipe Tooling and Kits, Plane of Bend Positioners

UNI-63 BENDER 1-1/2" 

Mandreless Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to 9 Bends Each

Dual Speed Bending

Electric Powered Rotary Drive, 220/460V, 3 Phase


OPTIONS 

Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories

UNI-70/C BENDER 2" 

Mandreless Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to 9 Bends Each

Dual Speed Bending

Electric Powered Rotary Drive

2 Drive Arbor Sizes Supplied 

UNI-76 BENDER 2-1/2"

Mandreless Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to 9 Bends Each

Dual Speed Bending

Electric Powered Rotary Drive

3 Drive Arbor Sizes Supplied 


OPTIONS 

Tube & Pipe Tooling and Kits

Tight Radius Accessories

UNI-89 BENDER 3" 

Mandreless Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to 9 Bends Each

Dual Speed Bending

Electric Powered Rotary Drive

3 Drive Arbor Sizes Supplied 


OPTIONS 

Tube & Pipe Tooling and Kits

Tight Radius Accessories

UNI Series Tube & Pipe Bender Chart
UNI SERIES-MANDREL

UNI MANDREL TYPE ROTARY TUBE / PIPE BENDERS
  

Mandrel Models:  UNI-70/HC  UNI-80  UNI-90
 

Rotary Benders built for durability, constructed in steel yet economically priced and designed with compact footprints, quick change tooling system and are digitally programmable for precision repeatability.

UNI70HC Tube & Pipe Bender

UNI-70HC BENDER 1-1/2 " 

Mandrel Type Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to
9 Bends Each

Hydraulic Clamps, Programmable

Hydraulic Mandrel Extraction, Programmable


OPTIONS

Mandrel Bending Tooling & Accessories

Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’

UNI80 Tube & Pipe Bender

UNI-80 BENDER 2 " 

Mandrel Type Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to
9 Bends Each

Hydraulic Clamps, Programmable

Hydraulic Mandrel Extraction, Programmable

Dual Speed Bending, Electric Powered Rotary Drive


OPTIONS

Mandrel Bending Tooling & Accessories

Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’

UNI90 Tube & Pipe Bender

UNI-90 BENDER 2-1/2 " 

Mandrel Type Rotary Tube & Pipe Bender

Digitally Store 50 Programs with up to
9 Bends Each

Hydraulic Clamps, Programmable

Hydraulic Mandrel Extraction, Programmable

Dual Speed Bending, Electric Powered Rotary Drive


OPTIONS

Mandrel Bending Tooling & Accessories

Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’

UNI Series Tube & Pipe Bender Chart2
bottom of page